Operation Manual

G
B
25
again by any unauthorized person.
Warning!
Store the compressor only in a dry location which
is not accessible to unauthorized persons. Always
store upright, never tilted!
7. DISPOSAL AND RECYCLING


       

8. POSSIBLE FAULTS AND RELATED PERMITTED REMEDIES
FAULT CAUSE REMEDY
Leakage of air from the valve
of the pressure switch with the

Check valve that, due to wear
or dirt on the seal, does not

Unscrew the hexagonal head of
the check valve, clean the valve
seat and the special rubber disk


14-15



Excessive performance request,
check for any leaks from the





restarts automatically after a few

In the V, 3 HP versions, it is does



Clean the air ducts in the


On lubricated and V type
models, check oil level and


After a few attempts to restart,


due to overheating of the motor

compressor running, low power





3 HP models, reset the thermal




Irregular functioning of the
compressor or breakage of the

Remove the plug and contact

Any other type of operation must be carried out by authorized Service Centers, requesting original parts.
Tampering with the machine may impair its safety and in any case make the warranty null and void.