Operation Manual
G
B
24
●  We recommend that you clean the appliance imme
●  Clean the appliance regularly with a damp cloth and 
vents; these may be aggressive to the plastic parts 
● 
You must disconnect the hose and any spraying tools 
6.2 Condensation water
bottom of 
 Warning! 
The condensation water from the pressure vessel 
will contain residual oil. Dispose of the condensa-
tion water in an environmentally compatible man-
ner at the appropriate collection point.
6.3 Safety valve (ref. 10)
safety valve from time to time to ensure that it works 
   
6.4 
Check the oil level at regular intervals
      
be  between  the  two  marks  MAX  and  MIN  on  the  oil 
Changing  the oil:  Recommended  hydraulic oil:  SAE 
6.5 Changing the oil
Switch  off  the  engine and  pull  the  mains  plug out  of 
       
uncontrolled manner, hold  a small metal chute under 
           
does  not  drain  out  completely,  we  recommend  tilting 
Dispose of the old oil at a drop-off point for old oil.
         
 
6.6 Cleaning the intake lter (ref. 1)
    
two halves of the plastic housing, tap it to remove the 
       
6.7 Storage
 Warning! 
Pull the mains plug out of the socket and ventilate 
the appliance  and all connected  pneumatic  tools. 
Switch off the compressor and make sure that it is 
secured in such a way that it cannot be started up 
MAINTENANCE RESUMPTIVE TABLE
FUNCTION
AFTER THE FIRST 
100 HOURS
EVERY 100 HOURS
EVERY 300 HOURS
Cleaning of intake filter and/or 
substitution of filtering element
Change of oil
 
Tightening of head tension rods  
Draining tank condensate  Periodically and at the end of work










