Operation Manual
G
B
21
1. PRECAUTIONS
An ACOUSTIC PRESSURE value of 4 m. corresponds 
to the ACOUSTIC POWER value stated on the yellow 
label located on the compressor, minus 20 dB.
THINGS TO DO
●  The  compressor  must  be  used  in  a  suitable 
environment  (well  ventilated  with  an  ambient 
temperature of between +5°C  and +40°C) and 
never in places affected by dust, acids, vapors, 
explosive or flammable gases
●  Always  maintain  a  safety  distance  of  at  least  4 
●  Any  coloring  of  the  belt  guards  of  the  compressor 
during painting operations indicates that the distance 
●  Insert  the  plug  of  the  electric  cable  in  a  socket  of 
suitable shape, voltage and  frequency complying 
●   
     
the direction of rotation is correct and matches that 
       Fig.  10, 
the air must be conveyed towards the head  of the 
●  Use  extension  cables with a  maximum  length  of 5 
●  
also of adapters and multiple  sockets should be 
●  Always use the  switch of the  pressure switch  to 
●  
●  When operating,  the  compressor must  be  placed 
on a stable, horizontal surface to guarantee correct 
THINGS NOT TO DO
●  Never direct the jet of air towards persons, animals 
your eyes against flying objects that may be lifted by 
●  Never  direct  the  jet  of  liquids  sprayed  by  tools 
connected  to  the  compressor  towards  the 
●  Never use the appliance with bare feet or wet hands 
●  Never  pull  the power  cable  to  disconnect the  plug 
●  Never  leave  the  appliance  exposed  to  adverse 
●  Never  transport  the  compressor with  the receiver 
●  
●  
Keep  children  and  animals  at  a  distance  from  the 
●         
   
or mental  capabilities, or lack  of experience  and 
knowledge, unless they have been given supervision 
or instruction concerning the use of the appliance by 
●  Children should be supervised to ensure that they do 
●  Do not  position  flammable or  nylon/fabric  objects 
●  Never clean the compressor with flammable liquids 
       
●         
       
● 
      
cannot not be used for pharmaceutical, food or medical 
purposes except after particular treatments and cannot 
THINGS YOU SHOULD KNOW
●  To  avoid  overheating  of  the  electric  motor, 
this  compressor  is  designed  for  intermittent 
operation as indicated on the technical dataplate 
       
       
thermal  cutout  of  the  motor  trips,  automatically 
cutting  off  the  power  when  the  temperature  is  too 
●  To facilitate restart of the compressor, in addition 
to the  operations indicated, it  is important  to 
return the  button  of  the pressure switch to  the 
Preserve this handbook for future reference










