Assembly Instruction

REMOVABLE PARTITIONS

To install REMOVABLE PARTITIONS,

locate WIRE SUPPORTS in the Upper and

Lower Shelves. Align Grooves in the Top

and Bottom Edges of the PARTITIONS

with the WIRE SUPPORTS, and carefully

slide the PARTITIONS between the Upper

and Lower WIRE SUPPORTS (as shown

below).

SHELF

LOWER

SUPPORTS

WIRE

SHELF

UPPER

GROOVE

REMOVABLE

PARTITION

ADJUSTABLE SHELVES

To remove ADJUSTABLE SHELVES,

remove SCREWS from SHELF

SUPPORTS, then carefully lift Shelves

up and out of the Armoire.

To reposition ADJUSTABLE

SHELVES, insert Stem of SHELF

SUPPORTS into Holes as shown.

Rest the SHELF on the SHELF

SUPPORTS, and reinstall SCREWS.

Note: If a Power Screwdriver is used, a

"low torque" setting is recommended!

SCREW

SCREWDRIVER

SHELF

SUPPORT

NOTE: Your furniture may have different design features than those shown in the drawing.

A-1258

CAREFULLY READ AND UNDERSTAND ALL

INSTRUCTIONS BEFORE PROCEEDING!

CAUTION:

(2) OR MORE PERSONS

RECOMMENDED FOR ASSEMBLY!

PAGE 1
A-1258 LOWER SHELF WIRE SUPPORTS UPPER SHELF CAREFULLY READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE PROCEEDING! REMOVABLE PARTITIONS To install REMOVABLE PARTITIONS, locate WIRE SUPPORTS in the Upper and Lower Shelves. Align Grooves in the Top and Bottom Edges of the PARTITIONS with the WIRE SUPPORTS, and carefully slide the PARTITIONS between the Upper and Lower WIRE SUPPORTS (as shown below).
PAGE 2
3 SCREWS CAREFULLY READ AND UNDERSTAND ALL INSTRUCTIONS Attaching BEFORE PROCEEDING! UPRIGHTS NOTE: If a Power Screwdriver is used, a "low torque" setting is recommended. 24 7/8" Self Adhesive FELT DISCS -31 ENTERTAINMENT CONSOLE -51 T.V. BOOKCASE 1 CAUTION: (2) PERSONS RECOMMENDED FOR ASSEMBLY and INSTALLATION! 2 Self Adhesive FELT DISCS A-1258-1 the PLASMA TV HUTCH to the ENTERTAINMENT CONSOLE Retaining Clips Retaining Clips 1.