Instruction Manual

2. SPECIFICATIONS

2.1 PLACING TOOL SPECIFICATION

Air Pressure Minimum - Maximum 5-7 bar (75-100 lbf/in)

Free Air Volume Required @ 5 bar/75 lbf/in 8 litres (0.28 ft)

Stroke Maximum 7 mm (0.276 in)

Motor Speed Spin On 2000 rpm

Spin O 2000 rpm

Pull Force @ 5 bar/75 lbf/in 19.1 kN (4300 lbf)

Cycle time Approximately 2.5 seconds

Weight Without nose equipment 2.2 kg (4.85 lb)

Noise values determined according to noise test code ISO 15744 and ISO 3744. 74200

A-weighted sound power level dB(A), L

Uncertainty noise: k

= 3.0 dB(A) 74.70 dB(A)

A-weighted emission sound pressure level at the work station

dB(A), L

Uncertainty noise: k

= 3.0 dB(A) 77.08 dB(A)

C-weighted peak emission sound pressure level dB(C), L

, peak Uncertainty noise: k

= 3.0 dB(C) 75.54 dB(C)

Vibration values determined according to vibration test code ISO 20643 and ISO 5349. 74200

Vibration emission level, a

: Uncertainty vibration: k = 0.127 m/s 0.317 m/s

Declared vibration emission values in accordance with EN 12096

2.2 TOOL DIMENSIONS

Fig. 1

Dimensions shown in bold are millimeters. Other dimensions are in inches.

ORIGINAL INSTRUCTION ENGLISH