Datasheet

90
CUTTING TOOLS www.stanleyworks.com
OPP HAND SAW
• Handle with marked 45° and 90° angles
• Hard point treatment increasing the
longevity of the teeth
• Universal teeth for general use
• ABS ergonomic handle
6-97-055 7 tpi x 550 mm X 50 3253566970554
CARPENTER’S ISOCELES TOOTHING HANDSAWS
• Resharpenable isoceles teeth
• Swedish quality steel blade
• Afxation of the blade on the handle by 3
zamak brassed screws
• An interchangeable moulded handle
allowing marking at 45° and 90°
• 3.5 teeth per inch for a large throughput
cut
1-15-416 3,5 tpi x 500 mm - 4 3253561154164
1-15-425 3,5 tpi x 600 mm - 4 3253561154256
PANEL SAW
• ‘HARD POINT’ permanently sharpened
blade
• Universal toothing
• Swedish quality steel blade
• Blade attached to handle via brass screws
• Moulded handle
• 13 teeth per inch
1-15-215 13 tpi x 320 mm - 4 3253561152153
JetCut HP BACK SAW
• Extremely fast cut both when pushing and
drawing
• Triple bevelled JETCUT toothing blade
• Allows marking at 45° and 90°
• Screwed moulded handle
• 11 teeth per inch for ne exact cutting of
wood and derivatives: panelling, plywood,
melamines, PVC
1-15-219 14 tpi x 300 mm - 4 3253561152191
UNIVERSAL TOOTHING BACK SAW
• ‘HARD POINT’ permanently sharpened
blade or can be resharpened for the 15-
257 model
• Universal toothing
• Swedish quality steel blade
• Blade attached to handle via brass screws
• Moulded handle
• 13 teeth per inch
1-15-255 14 tpi x 350 mm - 4 3253561152559
KEY HOLE SAW
• HARD POINT permanently sharpened blade
• Universal toothing
• Swedish quality steel blade
• Moulded handle
• 9 teeth per inch
1-15-511 9 tpi x 300 mm - 4 3253561155116
3