User Manual

72
Adding Portal Gateways One at a Time
Refer to Figure 45.
1 In the Configurator application, click the Portals Tab.
2 Click Add and the Configure New Portal Gateway screen opens.
3 In the Workstation field, select the location of your server.
4 Enter the name and description of the Portal Gateway.
Note Normally name Portal Gateways by their location. For large systems, work out a
naming scheme that makes it easy to locate the Portal Gateway in your segment.
5 Enter the IP address of the Portal Gateway. You will need to get IP addresses
from your network administrator.
6 Enter the port.
Figure 45 Configure New Portal Gateway screen
7 Click the ellipsis button next to the Channels field and select at least two chan-
nels that the Portal Gateway will use to communicate. Check with your network
administrator to make sure the channels are available.