User Manual

70
works do not allow port 5353 to be open, which is required by the application
when scanning for portals. This allows manual connection to the portal so
the portal can be configured. You must click on Update IP Configuration after
selecting this box.
5 Keep Connection Alive Checkbox
Allows the connection with the portal to continue, otherwise a reboot will oc-
cur after the action selected.
6 Generate Portal Certificates
Generates a portal certificate that is sent to the portal and stored to the file
system. Enable this box when data encryption is required. Multiple portals
can be selected when generating certificates.
7 Export Portal IP Configuration
Exports the portal IP configuration for the selected portals.
Set Default Configuration
Clear Transactions
When checked, allows you to clear all transactions from portals you select in
the list above. This may be selected in combination with the Set Back to Factory
Default checkbox. .
Set Back to Factory Default
When checked, allows you to set change the IP address(es) of the portal(s) you
select in the list above back to factory default (192.168.1.200). This may be select-
ed in combination with the Clear Transactions checkbox.