User Manual

68
4 Select a portal from the list.
5 At this point, you may change the IP address from the factory setting to one
from the range you’ve created. Click on Update IP Configuration to update the
selected portal.
6 Select IPv4 and/or IPv6 and enter the IP address.
7 You may need to adjust the SubNet Mask/Network Destination and Gateway to
match your network. Consult your network administrator for details.
8 If you wish to generate a SSL certificate for a more secure connection, click
on the SSL Enabled checkbox, then click OK.
Note If you enable SSL, you must create a certificate and load the certificate into your
system.
Figure 43 Update IP Configuration