User Manual

Installation Instructions for Stanley Omnilock 9KOM Cylindrical Locks
Stanley Omnilock
a Product Group of Stanley Security Solutions, Inc.
5
Installation Instructions for Stanley Omnilock 9KOM Cylindrical Locks
Preparing the door and door jamb
3 Install strike box and strike plate
1 Align with the center of the latchbolt, then
mortise the door jamb to fit the strike box and
strike plate. See Figure 6.
2 Drill the holes for the screws used to install the
strike box and strike plate.
3 Insert the strike box and secure the strike with the
two screws provided.
4 Check the position of the deadlocking plunger
against the strike plate.
Caution: The deadlocking plunger of the
latchbolt must make contact with the strike
plate, as shown in Figure 7. The plunger
deadlocks the latchbolt and helps prevent
someone from forcing the latch open when
the door is closed.
Figure 6 Installing the strike box and strike plate
Strike box
Strike plate
Door jamb
Figure 7 Aligning the deadlocking plunger with the
strike plate
Strike plate
Deadlocking
plunger
Door jamb