User Manual

Installation Instructions for Wi-Q Technology™ EXQ Exit Hardware Trim
BEST ACCESS SYSTEMS
a Product Group of Stanley Security Solutions, Inc.
4
Preparing the door
Hole Description Instructions
A Battery bracket hole 7/16″ diameter, thru
door
B Battery bracket/har-
ness hole
7/8″ diameter, thru door
C Sensor harness rout-
ing hole
7/16″ diameter, thru
door
D Door sensing switch
mounting hole and
channel
1” diameter hole,
drilled 1-3/4” deep, then
7/16” channel to intersect
door sensing wire routing
hole.
E Escutcheon mount-
ing holes
7/16″ diameter, thru
door
F Door sensing switch
magnet hole (in door
frame or opposing
door leaf)
1” diameter hole,
drilled 1-3/4” deep
(NOT SHOWN).
G Cylinder hole Precision: 1-3/8″ dia-
meter, thru door (for
2300, only into mortise
cavity)
Von Duprin: 2″ diameter
thru door
H Lift finger slot Precision/Sargent:
1-1/8″ diameter slot, thru
door
Von Duprin: 3/4″ diame-
ter slot, thru door
Figure 2 Outside door prep for use with
Precision exit hardware, 2100 Series
Outside of RHRB doorOutside of LHRB door
A
B
D
E
C
G
H
E
Figure 3 Outside door prep for use with
Precision exit hardware, 2200, 2700,
and 2800 Series
Outside of RHRB door
Outside of LHRB door
A
B
D
E
C
G
H
E