User Manual

BEST ACCESS SYSTEMS
a Product Group of Stanley Security Solutions, Inc
1
Contents
These installation instructions describe how to install your
45HQ Mortise Lock. Topics covered include:
Preparing the door ........................................................ 1
Configuring and installing the mortise case .............. 3
Installing the trim .......................................................... 4
Completing the installation .......................................... 9
Patents
Products covered by one or more of the following patents:
6,720,861
1 Identify holes to drill
1 Determine the lock function to be installed.
Caution: Determine the inside and outside, hand, and
bevel of the door.
2 See the
Holes by Function table and Figure 1 to
determine the holes to be drilled for the lock function.
Functions
Holes by Function
DV TV
Holes to drill
I/S O/S I/S O/S
A Forged trim
(2 holes)
†
† Determine trim holes based on trim type.
Through
door
Through
door
B Harness
†
Through
door
Through
door
C Standard cylinder
■
■
D Sensor & motor wire
(2 holes)
■ ■
F Thumb turn ■
G Trim mounting
(2 holes)
‡
‡ Because these holes pass through the mortise pocket,
it is recommended that each hole be drilled separately
rather than straight through.
Through
door
Through
door
H Lever
††
Through
door
Through
door
J Door sensing channel
(2 holes)
DO NOT
DRILL
See Figure
1
B
J
B
A
A
C
F
H
DD
G
G
J
J
Figure 1 Identifying holes to drill
For hole sizes, see the
Q06 Template
(T82606).
Installation Instructions for
Wi-Q™ Technology 45HQ Mortise Locks