User Manual

180
Firmware Reprogram
Perform the following steps to send firmware updates to your hardware.
1 If not already open, launch the Configurator application and click on the Firm-
ware tab.
Figure 129 Configurator Firmware Tab
2 Choose your device type from the dropdown menu, and choose the appropriate
firmware file.
Note If you are reprogramming both the Bootloader and Application files on a Controller,
you must update the Bootloader file first.
3 Check the boxes next to the devices that need updating. You can click Select
All or Clear All as needed.
4 Once you’ve made your selections, press Update.
5 The devices will be added to the Manage Firmware Updates queue below,
where you can view the download progress and status.