User Manual

160
System Overrides
Manager Override at Keypad Controller
When an AMS User is assigned the Manager Type, that user can change the cur-
rent access level at a Controller with a keypad. Once their credential has been
presented to a Controller and it has cycled, the following keys can be used to
change the Controller’s access level:
Note MC refers to Manager Credential.
Item
WDC WAC Omnilock
Function
Manager
Code
MC# MC MC Momentary Unlock.
Restore to
Normal
MC# + 0# MC + 0000 MC + 0 + CL Return to normal operation from an
override.
Toggle with
ID
MC# + 1# MC + 1111 MC + 1 + CL Places the device in a mode
to toggle between locked and
unlocked with a credential.
Unlock MC# + 2# MC + 2222 MC + 2 + CL Places the device in an unlocked
state.
Unlock with
ID
MC# + 3# MC + 3333 MC + 3 + CL Places the device in a mode to
unlock with credential.
Unlock with
ID and PIN
MC# + 4# MC + 4444 MC + 4 + CL Places the device in a mode to
unlock with credential and PIN.
ID
Required
MC# + 5# MC + 5555 MC + 5 + CL Places the device in a mode where
a credential is required to enter.
PIN
Required
MC# + 6# MC + 6666 MC + 6 + CL Places the device in a mode where
a PIN is required to enter.
Facility Card MC# + 7# MC + 7777 MC + 7 + CL Places the device in a mode where
all credentials with the correct
facility ID have access.
Lockout MC# + 8# MC + 8888 MC + 8 + CL Places the device in a mode where
only manager credentials have
access.
Toggle with
ID and PIN
MC# + 9# MC + 9999 MC + 9 + CL Place the device in a mode to
toggle between locked and
unlocked with a credential and
PIN.