User Manual

135
Figure 96 Right-click Portal messaging options
Note Momentary unlocks and overrides must be recognized and executed by the Portal
within five minutes of the command or they become obsolete. This feature ensures
that commands executed during period when the hardware cannot respond are
not executed when the hardware is back online.
Reader Controls
You can delete, reset and restore a reader to normal operation without going to
the physical location of the reader. In addition to these commands, you can mo-
mentarily unlock, override the access level, perform a deep reset and remove the
reader’s association to a Portal all from within the software. These functions are
accessible via a right-click in the Readers tab of the Configurator module. You can
also delete a reader from the system with the right-click function.
Note To delete more than one reader at a time, hold down the control key (CTRL) and
select using the left mouse key.
To Access Right-Click Reader Messaging
1 In the Readers tab Segment Tree, right-click on the reader and select the option
from the drop-down list. The software will ask you if you wish to proceed with
the operation.
2 Click Yes. If the reader is online, the operation is performed. If for any reason
the reader is offline and unable to execute the command, the message will