User Manual

134
To assign User Type
1 Under the User Tab, in the Settings category, select the field next to User Type.
2 Select a User Type from the drop-down list.
Portal and Reader Control and Messaging
Wi-Q AMS provides a number of features to reset and restore normal operations,
override locks and access levels, and temporarily remove reader association with
a Portal. These right-click functions send real-time instant messages to the hard-
ware from within the software.
Portal Controls
You can delete, reset and restore a Portal to normal operation without going to
the physical location of the Portal. These functions are accessible via a right-click
in the Readers tab of the Configurator module. You can also delete a Portal from
the system with the right-click function.
To access right-click Portal messaging
1 In the Portals Tab, right-click on the Portal and select the option from the drop-
down list. The software will ask you if you wish to proceed with the operation.
2 Click Yes. If the Portal is online, the operation is performed. If for any reason
the Portal is offline and unable to execute the command, the message will
become obsolete after five minutes.