User Manual

131
2 Select Finish and return to the Credential Setup dialog box.
Serial Card Reader
If you have a Serial Card Reader connected to your computer, select Serial Card
Reader and then select the appropriate com port from the drop-down list.
1 When you are ready to scan the card, select the Scan button. You will have
30 seconds to scan the card. When recognized, the number will display in the
Credential Number text box.
2 Select Finish and return to the Credential Setup dialog box.
Adding a Credential Type
At least one credential type must be defined for the system. The default credential
type in Wi-Q AMS is Keypad. If you use other than keypad credential types, you
can add them to the User Credentials Setup dialog box.
To add a card type to the list
1 In the Users Credentials Setup dialog box, select the Add button. The Add Cre-
dential to User dialog box opens
Figure 94 Add Credential to User
2 Select the Credential Type from the drop-down list, in this case, Proximity Card.
3 Select Finish. The User <Proximity Card> Credential Number Setting dialog box
opens.
4 Now, you may manually enter a credential number or scan the credential with a