User Manual

130
Note You may need to expand the drop-down list to view all available readers. Use the
highlighted area in the lower right corner.
Registering a Prox card credential
In the Proximity Card category, review the Prox Card Type. If the default entry
is not the one you will use, select the field and use the down-arrow to select the
correct type from the list.
To register a Prox Card Credential
1 Select Prox Card from the list on the left. Click the ellipsis in the Number field,
under the Credential category. The User Proximity Card Credential Number
Setting dialog box opens
Figure 93 Entering a Proximity Card credential number
2 Enter a Credential Number manually (must be less than 16 characters, zeros
will be appended) or select a scan device:
USB Card Reader
If you have a MSR 206 USB Card reader connected to your computer, select MSR
206.
1 When you are ready to scan the card, select the Scan button. You will have
30 seconds to scan the card. When recognized, the number will display in the
Credential Number text box.