User Manual

129
3 Enter a Credential Number manually (must be less than 16 characters, zeros
will be appended) or select a scan device.
Using a scanning device to register a credential
You can use a scanning device connected to your computer to register a creden-
tial.
1 Select Card Reader. When you are ready to scan the card, select the Scan but-
ton. You will have 30 seconds to scan the card.
Figure 92 Scan Credentials
2 When recognized, the number will display in the Credential Number text box.
3 Select Finish and return to the Credential Setup dialog box.
Using a local reader
You can use a local reader to scan the card credentials.
1 Select Reader, and then use the drop-down list to navigate to the reader where
the card will be scanned. When you are ready to scan the card, select the Scan
button. You will have 30 seconds to scan the card. When recognized, the num-
ber will display in the Credential Number text box.
2 Select Finish and return to the Credential Setup dialog box.