User Manual

121
Adding Users to the Segment
The system is now ready for you to add users. Follow the steps in this section the
first time you enter users, and each time you add a new user to the system. To get
started, navigate to the Users tab within the Configurator module.
Before You Begin
Before you begin adding users to the system for the first time, be prepared to ad-
dress the following items:
Note If you do not have this information, contact your System Administrator before you
begin.
If... Then...
You plan to use only keypad Controllers AMS assigns a unique keypad credential to each new
user and automatically registers it with the system.
You plan to use card readers You must know the card type and settings required for
that type.
You plan to use a serial scanning device at your
computer to register user credentials
The scanning device must be attached to the com-
puter com port and you must be able to identify that
port (Com1, Com 2) when you register the credential.
You plan to use local readers to register cre-
dentials
Know the reader name and locations to be used.
You plan to manually enter the credential
numbers
Have a credential number list or creating conventions
ready to enter.