User Manual

120
Misc
This category contains three fields (Contact 1, Contact 2, and Reference) that you
can use to store any miscellaneous information you that will be helpful to you and
your system. For example, you may decide to enter the phone number or email ad-
dress for Stanley Technical Support in case you experience technical difficulties.
PIN Settings
If your system will require user PINs, you may set the PIN length here. Perform
the following steps.
1 Click in the PIN Length field, and select the ellipsis button at the far right. The
PIN Length window opens.
Figure 84 Set the Value of PIN Length
2 Set the value to a number between 3 and 6 by typing it in or sliding the bar to
select the position of the PIN length you will use on segment cards. Then, press
OK.