User Manual

119
Figure 83 Associating an I/O event with a Reader
11 Click OK to save the association and return to the Setup dialog.
12 In the Reader Access level field, select either Unlock or Lockout from the drop-
down list.
13 In the Reference Trigger State field, select either Active High or Active Low
from the drop-down list (this reference will act as a toggle from one state to
the other).
14 Under Type, select the event type from the drop-down list.
 Restore Readers To Normal
 Change Output Reference
 Override Reader Access Level
 Override Timezone User Group Access
 Restore Output Reference To Normal.
15 Click Update and continue defining devices then click Finish to save your set-
tings and exit the dialog box.