User Manual

114
Issue Number Settings
You can issue a replacement card to a user in lieu of issuing a new User ID. The
Card Issue ID consists of one or two digits from 0 through 99. After using the card
with an incremented (higher number) Card Issue ID in a reader, that lock will no
longer accept cards with the same User ID that have a lower Card Issue ID.
Perform the following steps to define an issue number position.
1 In the Issue Number Settings category, click in the Issue Number Position Type
field.
2 Select either Character or Field from the drop-down list. The Issue Number
fields below activate.
3 Enter the Issue Number length.
4 Click the Issue Number Look Ahead Enable field, and select true or false from
the dropdown menu.
5 Enter the Issue Number position.
6 Select OK to save your settings and exit the box.
User ID Settings
You can specify the position of the User ID code in the credential number either
by character or field position. Perform the following steps to modify the User ID
Settings.
1 Enter the User ID Length.
2 In the User ID Position field, enter the position number.
3 In the User ID Position Type field, specify Character or Field.
4 Select OK to save your settings and exit the box.
5 Select Finish to save all your settings.