User Manual

110

Credential Settings

Wi-Q AMS can be conﬁgured to accept coding from existing Track 1(210 BPI),

Track 2 (75 BPI) or Track 3 (210 BPI) cards as long as the code does not exceed the

maximum number of characters for that track and/or controller. Magnetic cards

are conﬁgured as Track 2 by default. Perform the following steps to change to

change the segment track setting for encoding cards:

1 In the Magnetic Stripe Credential Conﬁgurations window, click the Card Track

Information link at the bottom of the window.

2 The Deﬁne Magnetic Stripe Card Track Information window opens. Specify the

desired track from the dropdown menu. Then click Finish.

3 Click OK to exit the Magnetic Stripe Credential Conﬁgurations window.

4 In the Segment tab, click Update at the bottom right to update your segment.

Card Track Limits

Wi-Q AMS is ﬂexible and may accept coding from existing Track 2 or Track 3

cards as long as they do not exceed the maximum number of characters for that

track and/or controller. These characters include any digits and ﬁeld separators,

however they exclude the starting and ending sentinels. Refer to the Stanley

Security Knowledge Base or contact Technical Support for controller hardware

track limits.