User's Guide

82
Wireless System
Muster Zone
Image - TBD
A Muster Zone is a Zone tagged with ‘In Muster’ or ‘Out Muster’. When you tag a Zone with
‘In Muster’, Intelli-M will track all users who enter that Zone. You can also tag a Zone with
‘Out Muster’ to track both sides of a Door.
A special Muster View on the Events Page displays the location of all cardholders in these
Muster Zones in real-time.
Cardholder vs. Group
Image - TBD
Stanley Intelli-M denes a cardholder and congures the cardholder’s access rights. It
also puts the Cardholder into a Group, similar to how Windows has Users and Groups. All
cardholders must be a member of one Group, and can be a member of multiple Groups.
Access Privileges are applied to Groups, not individual Cardholders. Therefore you can
modify the access privileges of a large number of Cardholders with one conguration
change. You can also change access privileges for a Cardholder by adding/removing them
from a Group.
Door Types
Image - TBD
A Door Type is a template that describes the input and output conguration gathered into a
single unit. Intelli-M installs several default Door Types.
Most or all your Doors’ wiring conguration is already described in one of the default Door
Types, but if you have Doors with atypical needs, you can create your own Door Type.
Door Behavior
Door Behavior declares the Door’s unlock schedule and the mode of the attached card
reader(s), such as “Card Only” mode or “Card plus PIN” mode.
Stanley Intelli-M creates one behavior by default: the “Always Locked” Behavior. This
Behavior sets the card reader to “Card plus PIN”. This single behavior covers the typical
operating procedures for most of your doors.