User's Manual

Sign on and Conﬁgure Controllers (Task 10)

Each segment created in AMS is assigned a discrete Sign On Key number. Select

a segment and you will ﬁnd this number in the ID Category of the Conﬁgurator

module’s Segment Tab.

Figure 58 Signing on readers from the Segment tab

If your segment uses Controllers with keypads, you must enter this number at

each Controller to establish connection between the Controllers and the Portals,

and ultimately to a segment in the software. If you use card readers, you can

create a sign-on card to use at each reader. Either way, you must sign on each

Controller in the system to register them in the database and ultimately establish

communication with the software.

Note Readers associated with Single Door Controllers are conﬁgured, signed on, and

monitored in AMS exactly like any other networked keypad Controller in the

system.