User's Manual

This manual is your complete guide to the Stanley Wi-Q Access Management

System. It provides detailed steps to install hardware and software, conﬁgure and

customize your system, and use and manage the system.

The information is presented in a linear manner, describing each tab, feature and

application in the system. However, tasks to install hardware and software and

conﬁgure the system for the ﬁrst time do not necessarily progress in a linear man-

ner. You will ﬁnd a Set Up Checklist at the end of this section and in the Getting

Started Guide to take you through the initial setup and conﬁguration tasks in a

logical sequence.

If you have not yet read through the Wi-Q AMS Getting Started Guide, it is a good

idea to do so before beginning any installation and setup. The Getting Started

Guide presents the big picture in just a few pages and will help you identify prob-

lems and create solutions as you work your way through hardware installation

and setup, software conﬁguration, and system operation. If you are unfamiliar

with the terms used in wireless technology, you may want to refer to the Glossary

included in this manual as Appendix A.

System Overview

The Stanley Wi-Q Access Management System (Wi-Q AMS) integrates pow-

erful access management software with Portal Gateways, Wireless Access

1 Overview