User's Manual

2 Insert the Ethernet cable into the Ethernet connection on the bottom of the

Portal Gateway. The Link Indicator light should come on. After about 30 sec-

onds, the yellow activity indicator light will ﬂash under normal operation.

Figure 7 Connecting the Portal Gateway to Power and Ethernet Connections.

Note If no protected area is available, consider positioning the Portal Gateway inside

a locked enclosure designed for that purpose. Contact your dealer for more

information.

Installing a Wireless Access Controller

The Wi-Q Technology Wireless Access Controller (WAC) provides an optional,

cost effective way to retroﬁt an existing hard-wired application, or where the in-

stalled controller my be obsolete or unable to handle additional controller inputs.

It supports Wiegand-compatible keypad Controllers and is conﬁgured and moni-

tored in Wi-Q AMS the same as a standard controller.

Note Please check with your Stanley representative for a list of compatible controllers.

Using the Wireless Access Controller (Figure 8), you can add controllers or other

I/O devices to an overall wireless solution without the high cost of installing hard-

wire such as RS485 or CAT5 to the controller. You can position the controller at

the door or where suitable above the ceiling tile.

Activity Indicator

Ethernet

Connection

Power

Port

Link Indicator Power Indicator