Datasheet

modifications in the sense of technical progress are reserved index 00 2000-12-04
type:
DIP24-2A72-21L
MEDER electronic AG
Friedrich-List-Strasse 6
78234 Engen-Welschingen
Phone.:
Fax:
eMail:
Internet:
+49 (0) 7733 / 9487-0
+49 (0) 7733 / 9487-32
[e-mail]
www.meder.com
part number:
3224200021
dimensions (tolerance ± 0,1mm) layout 21 L pitch 2,54 / top view marking
Type
data-code EN 60062
coil data condition Min. Typ. Max. unit
coil resistance at 20°C 1800 2200
W
nominal voltage 24 VDC
pull-in voltage 16.8 VDC
drop-out voltage 3.6 VDC
coil voltage at 20°C 47,0 VDC
coil voltage at 60°C 30,2 VDC
nominal power
determined with
nominal voltage and rated current
288 mW
contact data 72 (Form A/Dry)
contact material Ruthenium
rated power
each combination of the switching voltage
and current must not exceed the given
rated power
15 W
switching voltage 200 VDC
switching current 1,0 A
carry current 1,25 A
static contact resistance initial values measured with 1,4 x AT
pull-in
150
mW
Insulation resistance
RH W 45%
10
10
W
breakdown voltage 250 VDC
capacitance without test coil 0,3 pF
relay data
insulation resistance coil-contact 10
11
W
insulation voltage coil-contact 1,5 kVDC
shock ½ sine wave, duration 11ms 150 g
vibration 50 – 2000Hz 10 g
operate time including bounce
measured at 1,4 x AT
pull-in
0,5 ms
release time 0,1 ms
general data
operating temperature -20 70 °C
storing temperature -35 95 °C
soldering temperature 10 sec. at 260 °C
cleaning fully sealed
material of case mineral-filled epoxy
material of pins Cu-alloy tinned