Datasheet

174
MEDER electronic
www.meder.com
MS Series
MICRO SIL
Reed Relays
RELAY DATA
All Data at 20° C
Switch Model →
Contact Form →
Switch 87
Form A
Contact Ratings Conditions Min. Typ. Max. Units
Switching Power
Any DC combination of V & A not
to exceed their individual max.‘s
10 W
Switching Voltage DC or peak AC 200 V
Switching Current DC or peak AC 0.5 A
Carry Current DC or peak AC 1.0 A
Static Contact Resistance w/ 0.5 V & 50mA 150 mΩ
Dynamic Contact Resistance
Measured w/ 0.5 V & 50mA ,
1.5 ms after closure
200 mΩ
Insulation Resistance
Across Contacts
Coil - Contact
10
10
10
13
10
12
10
14
Ω
Breakdown Voltage
Across Contacts
Contact - Shield
Contacts and shield to coil
225
1000
1500
VDC
Operation Time incl. Bounce Nominal voltage 0.5 ms
Release Time
with no coil suppression
with diode suppression
0.1
0.35
ms
Capacitance - across open
contact
Open contacts to coil
Contact to shield
No shield
Shield oating
Shield guarded
No shield
Shield oating
Shield guarded
Contact open and shield oating
0.1
0.7
< 0.1
0.8
0.8
0.4
0.8
pF
Life Expectance
Switch Voltage 5V - 10 mA DC <10 pF stray cap. 1000
10
6
Cycles
For other load requirements, see test section on Page 112.
Environmental Data
Shock Resistance 1/2 sinus wave duration 11 ms 50 g
Vibration Resistance From 10 - 2000 Hz 20 g
Ambient Temperature 10°C/ minute max. allowable -20 70
o
C
Stock Temperature 10°C/ minute max. allowable -35 95
o
C
Soldering Temperature 5 sec. 260
o
C