Instructions / Assembly

Assembly Instructions:

Parts List:

1. One (1) Handle

2. One (1) Bracket

3. One (1) Allen Wrench

4. Four (4) Bolts

Instructions:

1. Loosen the four Bolts (Item-4) using Allen Wrench (Item-3) to allow Handle (Item-1) and

Bracket (Item-2) to move apart from each other. This will create an opening between the

Handle (Item 1) and the Bracket (Item-2). Note: Just loosen the bolts, do not take bolts

completely out.

2. Place your furniture recliner handle into the opening and tighten the four Bolts (Item 4) with

Allen Wrench (Item 3) until the Handle (Item-1) and the Bracket (Item 2) provide a secure

clamp on your furniture recliner handle.

Note: Foam pads located on the Handle (Item 1) and Bracket (Item 2) will provide protection

from scratching your recliner handle.

Visit Our Website at www.stander.com to view additional Standers

Products, or call us at 1-800-506-9901 for a free brochure.

THANK YOU FOR CHOOSING STANDERS’ PRODUCT!

STAND

ERS

–

LEVER EXTENDER

3000

PAGE 1
STANDERS – LEVER EXTENDER #3000 Assembly Instructions: Parts List: 1. 2. 3. 4. One (1) Handle One (1) Bracket One (1) Allen Wrench Four (4) Bolts Instructions: 1. Loosen the four Bolts (Item-4) using Allen Wrench (Item-3) to allow Handle (Item-1) and Bracket (Item-2) to move apart from each other. This will create an opening between the Handle (Item 1) and the Bracket (Item-2). Note: Just loosen the bolts, do not take bolts completely out. 2.
PAGE 2
Standers is committed to providing affordable products that exceed the customers expectations of function and value. We are developing new products that make daily living more enjoyable. You may visit our website at www.stander.com to see new products, or you may email or call us at sales@stander.com (1-800-506-9901) for a color brochure. WARNING 1. Product instructions must be carefully followed to ensure that the product is properly assembled and positioned.