User Guide

Turn the chair over onto its right side. Repeat
steps in figure 2 and figure 3 for the other side
of the chair. Make sure that the Recliner Riser
(B) is in front this time and Recliner Riser (A) is
in the back.
When finished, return the chair to its upright
position.
NOTE FOR SWIVEL BASED CHAIRS: Base
must be switched to a regular base prior to
installation. Most chair manufacturers will do
this for a small fee.
The Recliner Risers
TM
are designed to increase a person’s biomechanical advantage
while keeping his or her existing chair. Patients with total hip replacements or other conditions with
specific precautions should continue to follow the recommended guidelines set forth by their
physician or health care provider.
Contact Information:
Standers Incorporated
Phone: [phone]
Web:
www.stander.com