Instructions / Assembly

1120 Security Pole & Curve Grab Bar – Bathtub Edition V 1.0, December 14, 2022
6. For bathtub to ceiling distances less than 80” (2M), align the upper adjustment hole in E with the hole in D. For
distances between 80” (2M) and 90” (2.3M), align the center hole in E with the hole in D. For distances greater
than 90” (2.3M), align the lower hole in E with the hole in D. Insert L through D and E. Insert M through L to
secure as shown in FIGURE 6.
FIGURE 6
7. Install the remaining plastic sleeve, F or G, over E as shown in FIGURE 7. If E was connected to D using the
upper adjustment hole, the remaining plastic sleeve is unused. Note: Plastic sleeve, F or G, should fully cover all
visible metal on E while leaving the top hole accessible for the next step.
FIGURE 7