Marine RADAR User Manual

Radar Installation Manual Page 15
Standard Horizon Chart Plotter. Do not omit the in-line fuse unless a dedicated and fused
terminal is available. If so, install a 5 Amp fuse.
Terminal Strip C - Radar Cable
This terminal strip is used to connect the Radar Antenna.
2.6 RADAR ANTENNA CONNECTIONS
2.6.0 DOME Connections
Radar Switch
RADAR CABLE
WIRE COLOR FUNCTION
BLACK DATA GROUND
ORANGE DATA OUT+
YELLOW DATA OUT-
BROWN DATA IN+
RED DATA IN-
GREEN POWER ON/OFF SWITCH
BLUE POWER ON/OFF SWITCH
BLACK RADAR BATTERY GROUND
WHITE RADAR BATTERY POSITIVE
Figure 2.6.0 - DOME Connections
2.6.1 OPEN ARRAY Connections
Radar Switch
RADAR CABLE
WIRE COLOR FUNCTION
BLACK DATA GROUND
ORANGE DATA OUT+
YELLOW DATA OUT-
BROWN DATA IN+
RED DATA IN-
GREEN POWER ON/OFF SWITCH
BLUE POWER ON/OFF SWITCH
BLACK RADAR BATTERY GROUND
WHITE RADAR BATTERY POSITIVE
BLUE MOTOR SUPPLY-
RED MOTOR SUPPLY+
Figure 2.6.1 - OPEN ARRAY Connections
NOTE
When installing a Open Array Radar, it is important to connect:
a. Red (motor+) and White to B+ connection
b. Blue (motor -) and Black to B- connection.