User Manual

Page 73
GX1600/GX1700
5. The radio will show the stations programmed
in the individual directory. Press the
/ key to select the desired station and
press the soft key.
;#'57
(KUJGT
75%)
#WVQ 215 2QNNKPI
*14+<10
37+6
5'.'%6
Call 2:
Call 3:
Call 4:
-Auto POS Polling-
CALL 1:HORIZON
QUIT
SELECT CALL
6. Repeat steps 4 and 5 for CALL 2, CALL 3
and CALL 4 entries.
7. When finished, press the
soft key
three times to exit to the radio mode.
9.10.3 Enable/Disable Auto POS Polling
1. Press the key. The “
DSC Menu
” will
appear.
)TQWR
#NN 5JKRU
215 4GSWGUV
215 4GRQTV
&KUVTGUU#NGTV/5)
&5% /GPW
+0&+8+&7#.
37+6
5'.'%6
)TQWR
&KUVTGUU#NGTV/5)
#NN 5JKRU
215 4GSWGUV
215 4GRQTV
&5% /GPW
#761 215 21..+0)
37+6
5'.'%6
Select Address
-Auto POS Polling-
ACTIVATION
QUIT
SELECT
Stop
-Auto POS Polling-
START
QUIT
ENT
2. Press the / key to select “
AUTO
POS POLLING
”, then press the soft
key.
3. Press the
/ key to select the
“
ACTIVATION
”, then press the soft
key.
4. Select “
START
” to enable transmissions to
the stations or “
STOP
” to disable transmis-
sions to stations.
5. Press the
soft key.
6. Press the
soft key twice to exit to
the radio mode.
NOTE
When the radio receives position reports from a
called vessel the display will show the image as
in the right also NMEA 0183 DSC and DSE
sentences are outputted to a connected GPS
chart plotter or PC.
Received POS REPORT
Name:Horizon
ID:123456789
Since: 01:03
Category:Routine
QUIT
TO WPT SAVE
-POS INFO-