User Manual

GX1600/GX1700
Page 72
9.10 AUTO POS POLLING
The GX1600 and GX1700 have the capability to automatically track four
stations programmed into the individual directory.
9.10.1 Setting up the Polling Time Interval
The following steps allow the radio to setup the interval time between DSC
position request transmissions.
1. Press and hold the
key until “
Setup
Menu
” appears.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
-Setup Menu-
CH Function Setup
GPS Setup
MMSI Setup
Waypoint Setup
QUIT
SELECT
General Setup
DSC SETUP
-DSC Setup-
Individual Reply
Position Reply
Individual Ack
Individual Ring
Group Directory
AUTO POS INTERVAL
QUIT
SELECT
-Auto POS Interval-
30 sec
2 min
3 min
5 min
4 min
1 MIN
QUIT
ENT
2. Press the / key to select “
DSC
SETUP
” menu.
3. Press the
soft key, then select “
AUTO
POS INTERVAL
” with the / key.
4. Press the
/ key to select the
desired interval time (30 seconds, 1, 2, 3, 4,
5, 10, 20, 30, and 40 minutes) and press the
soft key.
5. Press the
soft key twice to exit to
the radio mode.
9.10.2 Selecting Stations to be Automatically Polled (Tracked)
NOTE
The radio uses the individual directory to select stations. Refer to
section “9.5.1 Individual / Position Call Directory Setup” and to
enter the MMSI of stations you want to poll before proceeding.
1. Press the key. The “
DSC Menu
” will
appear.
)TQWR
#NN 5JKRU
215 4GSWGUV
215 4GRQTV
&KUVTGUU#NGTV/5)
&5% /GPW
+0&+8+&7#.
37+6
5'.'%6
)TQWR
&KUVTGUU#NGTV/5)
#NN 5JKRU
215 4GSWGUV
215 4GRQTV
&5% /GPW
#761 215 21..+0)
37+6
5'.'%6
Activation
-Auto POS Polling-
SELECT ADDRESS
QUIT
SELECT
Call 2:
Call 3:
Call 4:
-Auto POS Polling-
CALL 1:
QUIT
SELECT CALL
2. Press the / key to select “
AUTO
POS POLLING
”, then press the soft
key.
3. Press the
/ key to select the
“
SELECT ADDRESS
”, then press the
soft key.
4. The radio will show 4 calling stations to be
selected, select “
CALL 1
” and press the
soft key.