User Manual

GX1600/GX1700
Page 50
9.5.4 Transmitting an Individual Call
This feature allows you to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.
9.5.4.1 Individual Call using the Individual/Position Call Directory
1. Press the
key. The “
DSC Menu
” will
appear.
)TQWR
#NN 5JKRU
215 4GSWGUV
215 4GRQTV
&KUVTGUU#NGTV/5)
&5% /GPW
+0&+8+&7#.
37+6
5'.'%6
+PFKXKFWCN %CNN
;#'57
$QD
5VCPFCTF
5WP .KIJV
*14+<10
37+6
5'.'%6 0'9 +&
-Select Intership CH-
06
08
09
10
13
15
QUIT
SELECT
-Select Intership CH-
08
06
09
10
13
15
QUIT
SELECT
Category:Routine
ID:234567890
Name:Horizon
CH: 08
Transmit?
-Individual Call-
QUIT
YES
Category:Routine
ID:234567890
Name:Horizon
CH: 08
Transmiting
-Individual Call-
%CVGIQT[4QWVKPG
+&
0COG*QTK\QP
%* 
5KPEG 
9CKVKPI HQT #%-
+PFKXKFWCN %CNN
37+6
4'5'0&
2. Press the / key to select “
INDI-
VIDUAL
”. (To cancel, press the soft
key.)
3. Press the
soft key. The “
Individual
Call
” menu will appear. The previous six
individual contacts will be listed.
4. Press the
/ key to select an indi-
vidual you want to contact.
Press the soft key to select an indi-
vidual other than those on the display.
5. Press the
soft key, then press the
/ key to select the operating chan-
nel you want to communicate on, then press
the soft key.
6. Press the
soft key to transmit the
individual DSC signal.
7. When an individual call acknowledgment is
received, the established channel is auto-
matically changed to the channel selected in
step 5 above and a ringing tone sounds.
8. Press the
soft key to listen to the
channel to make sure it is not busy, then
press the microphone’s PTT switch and talk
into the microphone to the other vessel.