User Manual

Page 39
GX1600/GX1700
How can I obtain an MMSI assignment?
In the USA, visit the following websites to register:
http://www.boatus.com/mmsi/
http://seatow.com/boating_safety/mmsi.asp
http://www.usps.org/php/mmsi/rules.php
In the Canada, visit
http://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf01032e.html
9.2.2 Programming the MMSI
WARNING
The MMSI can be inputted only once. Therefore please be care-
ful not to input an incorrect MMSI number. If you need to change
the MMSI number after it has been entered, the radio will have to be
returned to Factory Service. Refer to the section “16.2 FACTORY
SERVICE.”
1. Press and hold the key until “
Setup
Menu
” appears.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
Waypoint Setup
QUIT
SELECT
General Setup
MMSI SETUP
-User MMSI-
Input User MMSI
---------
QUIT
ENT BACK
-User MMSI-
Input User MMSI
123456789
QUIT
ENT BACK
-User MMSI-
Stored ID
123456789
OK
-User MMSI-
Input User MMSI
---------
*********
Input Again
QUIT
ENT BACK
-User MMSI-
Input User MMSI
123456789
*********
Input Again
QUIT
ENT BACK
2. Press the / key to select “
MMSI
SETUP
”.
3. Press the
soft key. (To cancel, press
the soft key.)
4. Press the
/ key to select the
first number of your MMSI, then press the
soft key to step to the next number.
5. Repeat step 4 to set your MMSI number (nine
digits).
6. If a mistake was made entering in the MMSI
number, press the
soft key until the
wrong digit is selected, then press the
/ key to correct the entry and press the
soft key.
7. When finished programming the MMSI
number, press and hold the
soft key.
The radio will ask you to input the MMSI
number again. Use steps 4 through 6 above.
8. After the second number has been input,
press and hold the
soft to store the
MMSI.
9. Press the
soft key to return to the setup menu.
10. Press the
soft key to return to radio operation.