User Manual

Page 21
GX1600/GX1700
6.7 CHANGING THE GPS TIME
From the factory the GX1600, when connected to an optional GPS, and the
GX1700 will display GPS satellite time or UTC (Universal Time Coordinated).
A time offset is needed to show the local time in your area. Please see the
time offset table at the bottom of this page.
1. Press and hold the
key until “
Setup Menu
”
appears, then select “
GPS SETUP
” with the
/ key.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
General Setup
-Setup Menu-
CH Function Setup
DSC Setup
Waypoint Setup
MMSI Setup
GPS SETUP
QUIT
SELECT
QUIT
SELECT
-GPS Setup-
TIME OFFSET
Unit Power
Coodinate System
Pinning
Time Area
Time Display
QUIT
ENT
-Time Offset-
+02:00
+01:30
+01:00
+00:30
+02:30
00:00
2. Press the soft key, then select “
TIME
OFFSET
” with the / key.
3. Press the
soft key, then press the
/ key to select time offset of your location.
See illustration below to find your offset time. If
“
00:00
” is assigned, the time is the same as UTC
(Universal Time Coordinated or GPS Satellite
Time).
4. Press the
soft key to store the time offset.
5. Press the
soft key twice to return to radio
operation.
tiMe OffSet tabLe