User Guide

Page 69
GX1600/GX1700
9.8.4 Stopping Navigation to Position Report
To stop navigating to a waypoint, press one of the
soft keys, then press the soft key. The radio is
switched to the normal mode.
9.8.5 Saving a Position Report Call as a Waypoint
The GX1600 and GX1700 can save a position report call in the radios
memory as a waypoint.
1. After the position report call has been received,
press the
soft key.
Received POS REPORT
Name:Horizon
ID:123456789
Since: 01:03
Category:Routine
QUIT
TO WPT SAVE
-POS INFO-
ID:123456789
QUIT
ENT BACK
-Waypoint Input-
WPT Name:Horizon
Position:
N
W
33 33.120
118 06.230
2. Press the / key to change the rst letter
in the name of the waypoint and press the
soft key.
3. Repeat step 2 until the WPT name is entered.
4. Press and hold the
soft key to save the
waypoint into memory.
9.8.6 Navigating to a Saved Waypoint
1. Press and hold the key until “
Setup
Menu
” appears.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
)GPGTCN5GVWR/GPW
&KOOGT
%QPVTCUV
-G[ $GGR
5VCVKQP 0COG
7PKV QH /GCUWTG
&+52.#;
37+6
5'.'%6
-Display-
Compass
Normal
WAYPOINT
QUIT
ENT
GPS Status
QUIT
SELECT
-Waypoint Directory-
Swim Point
Port
FISHING PT
QUIT
ENT
-Waypoint Input-
Position:
N
W
33 33.120
118 06.230
WPT Name:FISHING PT
ID:---------
Range 50NM
W E
N
S
10:00
LOC AM
N
W
33 37.120
118 09.580
16
25W
COG:123
T
SOG:25.0 MP
2. Select “
GENERAL SETUP
” with the /
key.
3. Press the
soft key, then select
“
DISPLAY
” with the / key.
4. Press the
/ key to select
“
WAYPOINT
” and press the soft key.
5. Press the
/ key to select the
waypoint name and press the soft
key.
6. Press the
key to show the compass
display and to navigate to the waypoint. The
display indicates the distance and direction
of the saved waypoint, and the compass
indicates the saved waypoint by a dot
(

)
icon.
W
E
N
S
N
W
33 37.120
118 09.580
FUNC.STOP LIST
16
25W
COG:123
T
SOG:25.0 MP