User Guide

GX1600/GX1700
Page 56
5. Press the soft key.
-DSC Setup-
Individual Reply
Individual Directory
Position Reply
Individual Ack
Individual Ring
GROUP DIRECTORY
QUIT
SELECT
QUIT
SELECT
Edit
Delete
ADD
-Group Directory-
QUIT
ENT BACK
Group Name
_
ID:0--------
-Group Directory-
QUIT
ENT BACK
Group Name
Horizon
ID:0--------
-Group Directory-
6. Press the / key to scroll through
the rst letter of the name of the group you
want to reference in the directory.
7. Press the
soft key to store the rst
letter in the name and step to the next letter
to the right.
8. Repeat step 6 and 7 until the name is
complete. The name can consist of up to
eleven characters, if you do not use all
eleven characters press the
soft key
to move to the next space. This method can
also be used to enter a blank space in the
name. If a mistake was made entering in the
name repeat pressing the soft key
until the wrong character is selected, then
press the / key to correct the entry.
9. After the eleventh letter or a space has been entered, press and hold the
soft key to advance to the group MMSI (Maritime Mobile Service
Identity Number) number entry.
10. Press the
/ key to select the
second digit of the MMSI (nine digits: first
digit permanently set to “0”) which you want
to contact, then press the soft key to
step to the next digit. Repeat this procedure
until all eight digits of the MMSI number are
entered.
QUIT
ENT BACK
Group Name
Horizon
ID:02-------
-Group Directory-
ID:023456789
QUIT
ENT BACK
Group Name
Horizon
-Group Directory-
11. If a mistake was made entering in the MMSI
number repeat pressing the soft key
until the wrong digit is selected, then press
the / key to correct the entry.
12. To store the data entered, press and hold the
soft key.
13. To enter another group address, repeat steps 5 through 12.
14. Press the
soft key three times to return to radio operation.