User Guide

Page 53
GX1600/GX1700
Manual reply:
1. When an individual call is received, an individual
call ringing alarm sounds.
The display shows the MMSI of the vessel calling.
0COG*QTK\QP
5KPEG 
%CVGIQT[4QWVKPG
%* 
37+6
2#75'#%%'26
+&
4GEGKXGF +PFKXKFWCN
2. Press any key to stop the alarm.
3. Monitor the channel for the person calling the group for a message.
On the display you will notice 3 soft key selections. These selections are
described below:
a.
: Press to immediately select Channel 16.
Note: If a key is not pressed for 30 seconds or longer the radio will auto-
matically select Channel 16.
b.
: Temporarily suspend switching to Channel 16.
c.
: Exit to the working channel.
4. Press the microphone’s PTT switch and talk into the microphone to the
other vessel.
5. Press the
soft key to return to radio operation.
NOTE
When there is an unread individual call, “
” icon will appear on the
display. You may review the unread individual call from the DSC log,
refer to the section “9.13.3 Reviewing Other Logged Calls.”
9.5.6 Setting up the Individual Call Ringer
When an individual call is received the radio will produce a ringing sound for
2 minutes. This selection allows the individual call ringer time to be changed.
1. Press and hold the
key until “
Setup
Menu
” appears.
-Setup Menu-
CH Function Setup
DSC Setup
GPS Setup
MMSI Setup
Waypoint Setup
GENERAL SETUP
QUIT
SELECT
-Setup Menu-
CH Function Setup
GPS Setup
MMSI Setup
Waypoint Setup
QUIT
SELECT
General Setup
DSC SETUP
-DSC Setup-
Individual Reply
Individual Directory
Position Reply
Individual Ack
Group Directory
INDIVIDUAL RING
QUIT
SELECT
+PFKXKFWCN 4KPI
 UGE
 UGE
 UGE
&'(#7.6/+0
37+6
'06
2. Press the / key to select “
DSC
SETUP
” menu.
3. Press the
soft key, then select
“
INDIVIDUAL RING
” with the / key.
4. Press the
soft key.
5. Press the
/ key to select ringing
time of an individual call.
6. Press the
soft key to store the
selected setting, then press the soft
key twice to return to radio operation.