User Guide

Page 51
GX1600/GX1700
9.5.4.2 Individual Call by Manually Entering a MMSI
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
1. Press the
key. The “
DSC Menu
” will appear.
)TQWR
#NN 5JKRU
215 4GSWGUV
215 4GRQTV
&KUVTGUU#NGTV/5)
&5% /GPW
+0&+8+&7#.
37+6
5'.'%6
+PFKXKFWCN %CNN
;#'57
$QD
5VCPFCTF
5WP .KIJV
*14+<10
37+6
5'.'%6 0'9 +&
+PFKXKFWCN %CNN
/#07#.
37+6
5'.'%6
;#'57
*QTK\QP
$QD
5VCPFCTF
5WP .KIJV
-Individual Call-
QUIT
SELECT BACK
Input MMSI
ID:---------
-Individual Call-
QUIT
SELECT BACK
Input MMSI
ID:345678901
5GNGEV +PVGTUJKR %*






37+6
5'.'%6
5GNGEV +PVGTUJKR %*






37+6
5'.'%6
2. Confirm “
INDIVIDUAL
” is selected. (To cancel,
press the soft key.)
3. Press the
soft key. The “
Individual
Call
” menu will appear. The previous six individu-
al contacts will be listed.
Press the soft key.
4. Confirm “
MANUAL
” is selected, then press the
soft key.
5. Press the
/ key to select the rst number
of the MMSI which you want to contact, then
press the soft key to step to the next digit.
6. Repeat step 5 to set the MMSI number (nine
digits).
7. If a mistake was made entering in the MMSI
number, repeat pressing the
soft key until
the wrong digit is selected, then press the
/ key to correct the entry.
8. When nished entering the MMSI number, press
and hold the
soft key.
9. Press the
/ key to select the operating
channel you want to communicate on, then press
the soft key.