User Guide

Page 37
GX1600/GX1700
8.11 INTERCOM OPERATION
An optional RAM3+
(
CMP31
)
must be connected to perform intercom func-
tions between the radio and the RAM3+
(
CMP31
)
.
In addition, to access the following intercom functions one of the soft keys
must be setup as
. Refer to section “10.8 SOFT KEYS.
8.11.1 Communication
1. Press one of the soft keys, then press the soft key to enable the
intercom mode.
Note: Depending on the programming of the soft key, the
soft key may have to be pressed to see the soft key.
2. When the intercom mode is enabled, “
Intercom
”
is displayed on the radio and RAM3+
(
CMP31
)
Remote Station Microphone.
-IC-
RAM1
25W USA
N
W
33 37.120
118 09.580
QUIT
BELL
3. Press the PTT switch on the
radio. “
Talk
” will be shown
on the display.
Note: A warning beep will
be heard if the PTT button
on the GX1600 or GX1700
and RAM3+
(
CMP31
)
micro-
phone are pushed simulta-
neously.
(
RAM3+’s PTT switch is pressed
)
GX1600/GX1700 RAM3+
(
GX1600/GX1700’s PTT switch is pressed
)
GX1600/GX1700 RAM3+
-IC-
Talk
RAM1
25W USA
N
W
33 37.120
118 09.580
QUIT
BELL
-IC-
Listen
RADIO
25W USA
N
W
33 37.120
118 09.580
QUIT
BELL
-IC-
Listen
RAM1
25W USA
N
W
33 37.120
118 09.580
QUIT
BELL
-IC-
Talk
RADIO
25W USA
N
W
33 37.120
118 09.580
QUIT
BELL
4. Speak slowly and clearly
into the microphone, hold
the microphone about 1/2
inch away from your mouth.
5. When nished, release the PTT switch.
6. Press the
soft key to exit intercom mode and revert to radio
mode.
8.11.2 Calling
Pressing the soft key when in the intercom mode on either the radio
or RAM3+
(
CMP31
)
microphone will produce a calling beep to the other
station.