User Guide
Page 17
GX1600/GX1700
6.5.1 GX1700 Internal GPS (DSC Output to a Chart Plotter)
(RS422 Connections)
Chart Plotter
External Speaker
Shield
White
Plotter
Connection
Radio Wires
Gray: NMEA DSC Output
()
GPS Input
()
GPS Input
()
Brown: NMEA DSC Output
()
6.5.2 GX1600 and GX1700 Connection to External GPS or Chart
Plotter (for GPS) (RS422 Connections)
The connections below are used for the GX1600, or the GX1700 when the
internal GPS cannot receive a Fix. The GX1700 internal GPS must be turned
off (refer to section “14.1 UNIT POWER (GX1700)”) and the GPS selection
must be set to “External GPS” (refer to section “14.9 GPS SELECTION
(GX1700)”).
6.5.2.1 GPS Input - Standard Horizon GPS Antenna
External Speaker
Shield
White
Radio Wires
Par
Q7000619A
t#:
Standard Horizon
GPSAntenna
Blue: NMEA GPS Input
()
Black
Black
Red
Brown
Green: NMEA GPS Input
()
12VBattery
2AFuse
() ()
Note: The GPS antenna is supplied with 30ft of cable
and a connector. To connect the GPS antenna to the
radio, cut off the 5 pin antenna connector, strip the white
insulation to expose the red, black and brown wires and
connect as shown in the diagram. All other wires are not
used and may be cut off. The 2 amp fuse is not included.