Operation Manual

GX1300
Page 98
10.3.8 Auto Channel Switching Time
When a DSC distress call or an all ships call (urgency or safety) is received,
the GX1300 will automatically switch to the channel 16.
This menu selection allows the automatic switching time to be changed.
1. Press the MENU key to display the menu.
BACK SELECT
BACK SELECT
SETUP
DSC SETUPGROUP
CHANNEL SETUP
CONFIGURATION
2. Press the ▲ / ▼ keys to select “
SETUP
”, then
press the
SELECT
soft key.
3. Press the ▲ / ▼ keys to select “
DSC SETUP
”,
then press the
SELECT
soft key. (To cancel,
press the
BACK
soft key.)
4. Select “
CH SWITCH TIMER
” with the ▲ / ▼
keys, then press the
SELECT
soft key.
BACK SELECT
DSC SETUP
AUTP POS POLL
AUTO POS TIME
CH SWITCH TIMER
DSC BEEP
5. Press the ▲ / ▼ keys to select the desired
time, then press the
ENTER
soft key. The
switching time can be set to “OFF”, “10 sec”,
“30 sec”, “1 min”, or “2 min”.
BACK ENTER
CH SWITCH TIMER
OFF
10 sec
30 sec
1 min
6. Press the
BACK
soft key to exit the menu and return to radio operation.
10.3.9 DSC Beep
This feature allows the alarm beeps to be turned on (default setting) or off
when a DSC call is received. The DSC calls that can be customized are:
individual, group, all ships, position request, position report call.
Refer to section “9.6.4 Setting up the Group Call Ringer” for setting.