Operation Manual

GX1300
Page 94
10.2.5 Scan Type
This selection is used to select the scan mode between “Memory Scan” and
“Priority Scan”.
Refer to section “8.7.1 Selecting the Scan Type” for details.
10.2.6 Scan Resume
This selection is used to select the time the GX1300 waits after a transmis-
sion ends before the radio start to scan channels again.
1. Press the
MENU
key to display the menu.
BACK SELECT
BACK SELECT
SETUP
DSC SETUP
CHANNEL SETUP
CONFIGURATION
2. Select “
SETUP
” with the
▲
/
▼ / ◄ / ►
keys,
then press the
SELECT
soft key.
3. Press the ▲ / ▼key to select “
CHANNEL
SETUP
”, then press the
SELECT
soft key.
4. Press the ▲ / ▼ key to select “
SCAN RESUME
”,
then press the
SELECT
soft key.
BACK SELECT
CHANNEL SETUP
SCAN TYPE
SCAN RESUME
PRIORITY CH
SUB CH
5. Press the ▲ / ▼ keys to select the desired
resume time.
BACK ENTER
SCAN RESUME
1 sec
2 sec
3 sec
4 sec
6. Press the
ENTER
soft key to store the selected
setting.
7. Press the
BACK
soft key to exit the menu and return to radio operation.
10.2.7 Priority Channel
Allows selection of the priority channel.
Refer to section “8.7.4 Priority Channel Setting” for details.
10.2.8 Sub Channel
Allows selection of the sub channel. The default setting is Channel 9.