Operation Manual

GX1300
Page 80
Position Polling - Manual MMSI Entry
1. Press the MENU key to display the menu.
BACK SELECT
BACK SELECT
DSC CALL
AUTO POS POLLING
TEST CALL
POLLING CALL
DSC LOG
2. Press the ▲ / ▼ keys to select “
DSC
”, then
press the
SELECT
soft key.
3. Press the ▲ / ▼ keys to select “
POLLING
CALL
”, and then press the
SELECT
soft key. (To
cancel, press the
BACK
soft key.)
4. Press the ▲ / ▼ keys to select “
NEW ID
”, then
press the
SELECT
soft key.
BACK SELECT
POLLING CALL
HISTORY
MEMORY
NEW ID
5. Press the ▲ / ▼ keys to scroll through
numbers, 0 to 9.
BACK SELECTFINISH
NEW ID
MMSI:
3--------
6. Press the
SELECT
soft key to store the number
and step to the next digit to the right.
7. Repeat steps 5 and 6 until the MMSI is complete.
If a mistake was made entering in the MMSI number, press the
◄ / ►
keys repeatedly until the wrong number is highlighted, then press the ▲
/ ▼ keys to correct the entry.
8. After the ninth number has been entered, press the
FINISH
soft key.
9. Press the
YES
soft key to transmit the polling
signal.
POLLING CALL
366901555
CATEG: ROUTINE
Transmit a Call?
YE
SN
O
10. After the polling call is transmitted, the
GX1300 waits for a reply from the radio which
was called, and the display will show “
WAITING
FOR ACK
”.
To transmit again, press the
RESEND
soft key.
POLLING CALL
366901555
CATEG: ROUTINE
SINCE: 00:05
[Waiting for ACK]
RESEND QUIT
11. When an acknowledgement signal is received,
the display will show “
Received ACK
”.
POLLING CALL
366901555
CATEG: ROUTINE
SINCE: 00:05
[ Received ACK ]
QUIT
12. Press the
QUIT
soft key to return to the radio operation.