Operation Manual

GX1300
Page 64
6. Press the
YES
soft key to transmit the position
request call.
POS REQUEST
YAESU
CATEG: SAFETY
Transmit a Call?
YE
SN
O
7. If the GX1300 does not receive a reply, the
display will be as shown in the illustration on
the right. To send again, press the
RESEND
soft
key.
POS REQUEST
YAESU
CATEG: SAFETY
SINCE: 00:05
[Waiting for ACK]
RESEND QUIT
8. When the GX1300 receives the position from the polled vessel, the
GX1300 will produce a ringing alarm sound and the position from the
polled vessel is sent to a GPS chart plotter via NMEA 0183. (DSC BEEP
needs to be enabled to hear alarm.)
Press any key to stop the alarm.
9. Press the
INFO
soft key to show the position
data transferred from the polled vessel on the
display.
RX POS REPLY
YAESU
POS ACKNOWLEDGED
SINCE: 00:05
QUITINFO
10. Press the ▲ / ▼ keys to change the display to
view the received data.
POS INFO
POS: 23°56.890N
123°56.890W
TIME: 12:56 UTC
RX POS REPLY
BACK QUIT
BACK
RX POS REPLY
QUIT
123°56.890W
TIME: 12:56 UTC
DST: 29.8NM
BRG: 270°T
11. To exit from position request display, press the
QUIT
soft key.s
NOTE
If the GX1300 does not receive position data from the polled vessel,
the position and time of LCD will show "--".
POS INFO
POS: --°--.---_
---°--.---_
TIME: --:--
RX POS REPLY
BACK QUIT