Operation Manual

Page 31
GX1300
8.8 MULTI WATCH (TO PRIORITY CHANNEL)
Multi watch is used to scan two or three channels for communications.

In Dual Watch, a normal VHF channel and the priority channel are
scanned alternately.

In Triple Watch, a normal VHF channel, the priority channel, and the sub
channel are scanned alternately.
When a signal is received on the normal channel the radio briefly switches
between the normal channel and the priority channel to look for a transmission.
If the radio receives communications on the priority channel the radio stops and
listens to the priority channel until communication ends and then starts dual or
triple watch scan again.
8.8.1 Setting up the Multi Watch Operation
1. Press the
MENU
key to display the menu.
BACK SELECT
BACK SELECT
SETUP
DSC SETUP
CHANNEL SETUP
CONFIGURATION
BACK SELECT
CHANNEL SETUP
WEATHER ALERT
MULTI WATCH
SCAN MEMORY
SCAN TYPE
BACK ENTER
MULTI WATCH
DUAL
TRIPLE
2. Select “
SETUP
” with the
▲
/
▼ / ◄ / ►
keys,
then press the
SELECT
soft key.
3. Press the ▲ / ▼key to select “
CHANNEL
SETUP
”, then press the
SELECT
soft key.
4. Select “
MULTI WATCH
” with the ▲ / ▼ keys,
then press the
SELECT
soft key.
5. Press the ▲ / ▼ keys to select “
DUAL
” or
“
TRIPLE
.”
6. Press the
ENTER
soft key to store the selected
setting.
7. Press the
BACK
soft key to exit the menu.